how to unlock iphone 1.1.2 or 1.1.3(new ones to work with qtel)(for begginers)

ok,,this is how.looks hard but eaaaaaaassssssssy

first download these files

firmware 1.1.1 : http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/06...

ibrickr for (windows\) http://ibrickr.com/downloads/ibrickr_v0.91.zip

STEP 1 - DOWNGRADE FROM 1.1.2 TO 1.1.1

downgrade 1.1.2 to 1.1.1

downlaod itunes for if you dont have it at apple.com

- Next Plug your USB in your computer and in your iphone, Itunes will automatically open and give you an ACTIVATION page

-Now press the MENU BUTTON and THE POWER BUTTON at the same time and
keep pressing them until Itunes tells you that it has detected that
your Iphone is in recovery Mode, this could take something from 10 seconds to 30
seconds, so keep pressing both buttons until you get the message.

-now BEFORE YOU PRESS ON THE RECOVER BUTTON YOU NEED TO PRESS YOUR SHIFT
BUTTON IN WINDOWS AND THEN PRESS RECOVER

-Now a "Browse your files" window will open, go and chose the firmware 1.1.1 file you have downloaded in earlier and press open

-now Itunes will start downgrading your iphone (this takes some time)
and the downgrade process will end up with an error message 1013 or
1015 THIS ISVERY NORMAL

--Next if you are using Windows Open Ibrickr (You have to Unzip
Ibrickr.zip onto a Folder preferably on your desktop and then run
ibrickr.exe) and chose the Option "Reboot my Iphone" to kick your Iphone out of the Recovery Mode
(If your iphone screen turns red after pressing the reboot button then
everything is OK.

-
Now you iphone will restart and you will have an ACTIVATION PAGE on your iphone with the nice round WOrld image.now we finished the big part.

STEP2 - ACTIVATE AND JAILBREAK

Before you complete this part MAKE SURE that the AT&T Sim card is in your phone

-Now, you are on the activation screen that says slide to make an
emergency call, slide to get to the keypad and then do the following:

NOTE THUT YOU MUST HAVE WIFI ON THIS STEP IF YOU DONT HAVE COFFE SHOPS AND OTHER PLACES DO

Dial *#307# and hit call

The iPhone will now start to ring itself, once it start to ring you
have to erase *#307# by using the backslash button on your iphone and
then type 0 and then CALL, the iphone will ring again and this time hit
"Answer" then hit "Hold", the Phone will start to ring itself again,
this time click "Decline".

Now on the screen you should be able to get to the contacts menu down
the bottom, tap "Contacts" and then add a contact. Use the following
instructions:

Add the Name "Testing" and tap save ( you can add any name it's not important)
Tap "Add URL" and type "prefs://1F" then tap save
Tap "Add URL" again and type "jailbreakme.com" then tap save

When this is done, tap "Save" again and it will take you to the contact
page displaying the name "Testing" and the two URLs you just added. Tap
the "prefs://1F" URL and it will open the iPhone Settings page.

Tap "General" and Then "Auto-Lock", set it to "Never".

Go back to the settings page

From here, tap WiFi and Add your WiFi network and make sure you are connected to it

Now, hit the Menu button to go back to the Activation Screen, slide and
dial the number 0, the iPhone will now ring itself again, tap answer,
then hold, then decline just like before.

Now, hit contacts again and then Testing, this time go to the "jailbreakme.com" URL
Safari will open and loan the page, scroll to the bottom and click on "Install AppSnapp".

Safari will now close and your iPhone will now go back to the Activation Screen.

Once you get to the activation screen slide to get to the dial pad
again and when you do this iPhone will restart by itself and thats it,
your now Activated and JailBroken.

STEP4 - SIM UNLOCK YOUR IPHONE

- Go into installer, after your sources refresh if there are any updates available please go ahead and install them.

Once they are installed make sure that you go in SOURCES and press REFRESH

When the refresh is done go into ALL PACKAGES and scroll down until you find BSD SUBSYSTEM and install it.

When the installation is done press your HOME button, you will be taken
to the SLIDE TO UNLOCK screen, slide and unlock and go into the
INSTALLER, Press the INSTALL button, scroll down to TWEAKS (1.1.3)
locate the file called 1.1.2-1.1.3 OTB G-UNLOCK

-INSTALL IT !!!! (DONT FORGET TO PRESS THE "HOME" BUTTON ONCE THE INSTALLATION IS DONE)
STEP4 - UPGRADE TO FIRMWARE 1.1.2 & ACTIVATE AND JAILBREAK

download firmware 1.1.2 from here http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/06...

-Click on INSTALLER on your iphone (Blue Icon usually the last one)
If you are asked to update your Installer please do it (if you updated
don't forget after the update installs press the HOME button, it will
take you back to the SLIDE TO UNLOCK page )

-Now open your ITUNES on your PC or MAC and press on the name of your
IPHONE in the left colum, this will take you to the page with UPDATE or
RESTORE buttons

On your IPHONE clicK on INSTALLER and press on TWEAKS 1.1.1 and press and install Oktoprep,
once it is installed it will give you a message on your iphone saying
"YOUR PHONE IS NOW READY TO BE UPGRADED TO 1.1.2 ........" press OK and
then press the HOME button and it will take you back to the SLIDE TO
UNLOCK.

-Your ITUNES is still open on your PC or MAC now press SHIFT on your
keyboard and then UPDATE and ITUNES will open a browse window. Point to
the 1.1.2 FIRMWARE file that you downloaded earlier and press OPEN.

Itunes will update your iphone to FIRMWARE 1.1.2 and this time you will
not get an error message like the last time when u downgraded to 1.1.1,
You will get a msg telling you "Your iphone was successfuly Updated to
1.1.2"

When the Update is finished you will get a picture of a plug that will
appear on your iPhone and you will have the page SLIDE TO UNLCOK
written in different languages

-Close ITUNES on your PC

-download and unzip 1.1.2 Jailbreak from here http://conceitedsoftware.com/iphone/1.1.2-jailbreak.zip

-In the Folder you will find the file windows.baT Open it and press on JAILBREAK!AND PRESS TICK INSTALL SSH
This will take some time and at the end you will get a message that says .....iphone reboting or something like that... And you will get back to the SLIDE to UNLOCK page

no go to installer

system:install iworld.

then open iworld and choose qatar

YOU ARE DONE !!!!.TED AND JAILBROKEN and SIM UNLOCKED 1.1.2 IPHON