wirless issue

from your phone, put IP Address, DND Server, Subnet Mask to make it work with the wireless. I tried and it works :)

I fixed ma pda yesterday.. thanx for helping everyone.. actually i uninstalled all the updates i made.. and finally fixed it... :)

okay... but i dont have password..neway.. thanx for helping... :)

i didnt say there is problem with the router. its with the security maybe your pda doesnt authenticate with security encryption better disable it first to verify.

or better yet try changing your security mode to "WEP" encryption "10/64-bits".

plumkiwi i dont think there is any problem with the router coz i am using same connection on ma laptop with the same security settings... wot d u saY?

you can hard reset your wireless router by pressing the small button at the back with a paper clip, BUT YOU WILL NEED TO RE-CONFIGURE THE ROUTER - anyway its just username and password for the ADSL setting you just have to obtain that information before doing the hard reset.

wrong username or password...

1. login to your router usually if you didnt change its ip it should be http://192.168.1.1

enter username: admin(default)

password:admin(default)** for linksys router

2. go to wireless menu then under it wireless security then in the "security mode" click "disable" then save settings.

Authentication on ma laptop is WPA-PSK

DATA ENCRP TKIP

I CAN CONNECT WIRELSS ON MA LAPTOP BUT NOT ON PDA....ITS SO STRANGE

how to disable security sir..?

did you check the authetication??? does your wireless router has security enable? can you try to disable the security settings of your router first.

which is ur router model.. U can try upgrading the firmware of it...if u hv problms in wifi access with ur router

1. Are you using vista?

2. Can you go to the command line window and type "ipconfig /all" and then paste the result here? Let's see what you are getting if any.

still not working :(

try this one . .

http://theillustratednetwork.mvps.org/WM2003/WirelessConnectivity/WiFiHelp.html

if that thing doesnt work out. will sort that thing again tom. kinda sleepy now.

Its ipaq h6315 OS: Windows 2003

please provide us the brand and model of your PDA for us to be able to support you. . much better if you post it in QL IT CORNER.

thanks. . .

thanks king... but i am askin about wifi connection on pda..

router if you can even access it through IP, but if you can then it's always easy to change the network key ... join our group:

http://www.qatarliving.com/group/ql-it-corner

and wait for the complete configuration of the linksys router there ... I'm working on it now and soon to post it.

Best Regards

Do not dwell in the past, do not dream of the future, concentrate the mind on the present moment. (Gautama Buddha)

I tried it beforee but its not workingg.... i think i need network key... but i dont know the key...

that is the thing ... It's either you will enable DHCP or assign the following IP to your PDA assuming the the subnet on your linksys is the default:

Hope that would help ...

Do not dwell in the past, do not dream of the future, concentrate the mind on the present moment. (Gautama Buddha)

I am using linksys router.. i tried to assign static ip but it dint workat all.. and yes DHCP is disable on the router....

what kind of router are you using btw? Can you check the IP range that your Router DHCP server [if it's working] is assigning to the clients? If you know the range, just try assigning your wireless connection on the PDA a static IP Address. The DHCP on the router might be disabled ...

Do not dwell in the past, do not dream of the future, concentrate the mind on the present moment. (Gautama Buddha)

TCP/IP Configuration in Vista

This is the most important part of network card configuration in Vista. You must

configure the network card, so that this computer can communicate with other

computers or network devices. You will need to have TCP/IP protocol and other

Windows network items installed in order to make it work correctly.

1) Go to Start and right click on Network and then click Properties.

2) Network and Sharing Center window will appear, then click Manage network

connections.

3) Network Connections window will appear. Here you can right click on the network

card that you wish to configure and click Properties.

4) In the Local Area Connection Properties window, tick on Internet Protocol

Version 4 (TCP/IPv4) and click Properties.

Manual IP Assigning

You can now key in the IP address, Subnet mask, Default gateway and DNS

servers.

Note: IP address of your computer must be unique. None of the 2 computers in the

network can share same IP address, it causes IP address conflict.

>

[img_assist|nid=50852|title=hmm|desc=|link=none|align=left|width=|height=0]

If you have vista it needs special configuration

[img_assist|nid=50852|title=hmm|desc=|link=none|align=left|width=|height=0]

:(

No man i have been using it fm 6 months on ma pda... it gets signals from other access points which are far far away.. but not from ma router which is the nearest point.. settings are perfectly okay...

Aisha-Taweela, I think you need an IT person to solve your problem as my laptop is working flawlessly..

^_^

try to get closer to the access point (WiFi access point) as PDAs are not that adept as laptops in collecting signals.. if this doesn't work, there could be a problem in your settings or your PDAs wifi capability is busted...

have a nice day..

yes aisha you are rite.. from last two days i hve ben unable to connect.. today its working fine but still not on ma pda... :(

Thnx for replying but its not working....The connection is completly unavailable.. :( i am using ipaq h6315...and tried everything.. but its not working..:(

I am having problems, my daughter is having problems on her laptop too. My friend has problems with his computer too. What is happening?>

Aisha-Taweela

I had used manual setting to connect my Nokia phone to my Wifi. 1st identify your settings from laptop: if you use vista its there in network n sharing center-view status (of the particular connection)-details: from there you will get the IpV4 settings like IP address, subnet mask, default gateway, DNS servers etc. what i did was substitute the last digit 1 in IP address field alone to 5 n use all other the same details to setup access point in the device.It worked for me.!