Description

Pg. 1/5 Jaison_CV 2015
CURRICULUM VITAE
JAISON T. JAMES
Malisseril House, Res (India): 0091 479 Show number2306532
Kallumala P.O., Mobile(India): 0091 97 46 Show number842637
Mavelikara, E-mail : [email protected]
Alappuzha District,
Kerala-Show number690110,
INDIA
OBJECTIVE:
To work for a growing organization and attain a challenging position, which will enrich me with
knowledge providing opportunities to learn and work with team spirit in competitive and laborious
situations.
EDUCATIONAL QUALIFICATIONS:
 B.E. Aeronautical Engineering(under faculty of Mechanical Engineering) with First Class (76%)
under Anna University, Tamilnadu, India, April 2009.
 HSC-Class 12 (Higher Secondary Certificate) with Distinction (85%), Kerala State Board, India,
March 2005.
 ICSE-Class 10 (Indian Certificate for Secondary Education) with First Class (76%) from Bishop
Moore Vidyapith, Mavelikara, India, March 2003.
CERTIFICATIONS, TRAININGS AND MEMBERSHIPS:
 ASNT NDT Level 3 - Magnetic Particle Testing(MPT) and
Radiographic Testing (RT). ASNT ID # Show number194800
 Welding Inspector CSWIP 3.1 (TWI, UK)-Certificate # 87380 ,Expiry: 07/05/2019
 ISO 9001:2008 Lead Quality Auditor- IRCA approved
 American Society for Non-destructive Testing (ASNT) Level II certificates in
 Ultrasonic Testing (UT)
 Liquid Penetrant Testing (PT)
 Visual Testing (VT)
 Leak Testing (LT)
 Member of American Society for Non destructive Testing (ASNT)- ID# Show number194800
 ISO 9001:2008- Awareness training from DQS-UL, Germany.
 Internal Audit according to ISO 17025:2005 Training course from Dubai Accreditation
Department (DAC), Dubai Municipality, Dubai
 Certified Quality Controller (Personnel Certification Program) from Decibel NDE Training
Institute, Palakkad, Kerala.
 T-BOSIET (Tropical Basic Offshore Safety Induction and Emergency Training) and
H2S training certificates from Enertech, Qatar.
 Training on Measurement of Uncertainty according to ISO 17025 at EADS CCQ, Qatar.
 Fire Warden Training in November 2013, by Qatar Foundation(QF)-HSSE Directorate
Pg. 2/5 Jaison_CV 2015
WORK EXPERIENCE: (5YEARS + 1MONTH)
Worked as Quality Officer in Mechanical and Metallurgical Testing Laboratory (Destructive and
Non Destructive Testing) at EADS Competence Center of Qatar QSTP-LLC, DOHA, QATAR
from November 2011 till July 2014.
 Managed Laboratory Quality Management System in accordance with ISO 17025:2005(~ISO 9001).
 Performed and assisted in Internal and External audits according to ISO 9001:2008 and ISO 17025:2005.
 Reports to the General Manager on the performance of the Quality Management System, HSE and any
needs for improvement.
 Co-ordinate Project/contract Quality Kick-off meetings and Quality trainings
 Review and Monitoring Sub-Contractor’s Quality Systems and quality performance
 Approve all Quality Management System documentations.
 Update and issue Quality manual, in-charge of document control, prepares and conducts Quality
and Management review meetings.
 Communicates and assists in external audits from Dubai Accreditation Department (DAC), Dubai,
Qatar Petroleum (QP), Maersk Oil Qatar, NKOM, RASGAS, QATARGAS and various clients.
 Open and follow-up non-conformances, periodic updates of various Technical and Quality procedures.
 Identify non-conformances and agree corrective action(s) with responsible Management and
companies.
 Attend weekly/Inspection meeting’s, Monthly progress meetings, and hold quality/inspection special
meetings with the client representatives , prepare minutes of meetings and its distribution and follow
up action for the resolution of highlighted issues.
 Review, update, and implements QMS standards and annual training plan for all staffs.
 Participated in Root Cause Analysis to identify corrective actions, proposes improvement actions
and risk analysis, follow ups of various internal and external audits program.
 Collation of customer survey/feedbacks periodically and recommends essential changes.
 Coordinate Review of WPS/PQR, NDE Procedures, ITP etc..submitted by Subcontractors.
 Performed NDT inspections-UT, MT, VT and PT inspections of on various sites across Doha.
 Radiographic film interpretation, review of different NDT methods/reports viz. RT, UT, MT, PT,LT etc..
 Inspection of welds on site, destructive testing and performs Visual and Macro Examination.
 Performed various on-site jobs like Positive Material Identification, Portable Hardness,
Ferrite testing and Liquid Penetrant tests.
 Executed chemical analysis using Optical Emission Spectrometer (OES), performs Vickers,
Brinell Hardness tests and macro-examination.
 Experience with various standards like ASME Section II, V, VIII, IX, B31.3, ASTM’s, API 1104,
NACE, ISO’s, QP, QCS, etc..
Worked as Assistant QA/QC Engineer at Mathew Associates Hook-up and Weld Services,
Mumbai, India from October 2010 to October 2011.
MHNRD II Pipeline and Modification Project :
Topside Modification Onshore Fabrication and Offshore Hook-up at ONGCL – NQO, NP, NR, LA & LC
Platforms.
 Preparation and review of ITP for different type of Insulations, Coating, piping and structural fabrication
like Building structures, compressor shelters, silo platforms, LNG Jetty pipe racks, pipe supports etc.
 Preparation of WPS, PQR, WQT, weld maps, welding data sheets, repair procedures etc.
 Implement and supervise project QMS.
 Maintain welder performance status, welder continuity, repair rate, WPS and qualification matrix.
Pg. 3/5 Jaison_CV 2015
 Assure that activities requires for QMS are planned, implemented, controlled, and their progress
monitored.
 Monitor personnel for compliance with various Quality and safety requirements.
 Coordinating with respective clients and vendors throughout Inspection process period.
 Check on welding consumable storage/use. Visual check on weld joint for edge preparation, fit-up, root,
preheat, inter-pass and final welds. Monitoring WPS implementation on job by welders.
 Witness of Pressure tests, leak tests, PQR, WQT, PWHT etc.
 Carryout welder surveillance on a daily basis and review daily welding reports.
 Ensure that the welders are qualified to the WPS.
 Check and record welding parameters and verify compliance with approved WPS.
 Review of approved welding procedure, Qualification records
 Preparation and submission of NDT records.
 Reviewing and interpretation of Radiographic Film.
 Analyzing the quality of each joint.
 Carrying out the stage inspection like fit-up, dimensional, welding inspection at site.
 Visual inspection of welded joints.
 Inspection of the Pre Heating, Inter pass temp and Post weld Heat treatment
 Development and maintenance of site QA/QC programs and monitor and collate fabrication quality
records to assure accurate and efficient collation and on time delivery of quality records.
 Ensures compliance with subcontractors and contractor internal Quality procedures as well as project
documentations.
 Fit-up, dimensional, distortion control, pre-welding, during and post welding monitoring, inspection and
control.
 Maintain interfaces with Project team and Site management and monitor plans and activities of site
QA/QC.
Worked as NDT Engineer for Decibel NDE Inspections, Palakkad, Kerala, India from
June 2009 till September 2010
 Performed NDT material inspection, dimensional check ,refers and updates welding standards,
welding inspections, welding procedure qualification, welder qualification, selection of electrodes,
visual welding inspections etc.
 Follow-up with the help of other inspectors, the review of the As Built Dossier for completeness and
correctness.
 Radiographic Interpretation(RTFI) of welded joints, Ultrasonic testing, Magnetic particle testing,
 Liquid penetrant testing, Radiographic testing and Visual testing, reporting and documentation.
 Handled construction and quality control activity as specified in the drawings according to the
 applicable standards and specifications (API, ASME, NACE,ASTM’s etc..).
 Witness of PQR, WPS, Non Destructive tests like UT, PT, RT, RTFI and MT.
 Participate in a team of QA / QC / WELDING / NDT / Engineers for inspection issues and quality
implementation on various sites.
 Maintain a regular and complete submission of daily report to the Asst. Engineer in the department.
 Analyzing the work progress and reporting to the site in charge.
 Find out the modifications as per the site condition during erection and reporting to the
authority for necessary change.
 Keeping and maintain the fit up report and welding report.
 Welding inspection and analyzing the quality of each joint.
 Overall supervision of welding and fabrication works in the work site.
 Ensure safe working condition to all workers
Pg. 4/5 Jaison_CV 2015
LEADERSHIP QUALITIES:
 cultural activities.
PERSONAL SKILLS:
 Excellent verbal and written communication skills.
 Ability to manage and deal with people from diverse nationalities diplomatically.
 Proficient in MS-Office (Excel, Powerpoint, Word and Outlook)+ troubleshooting, CAD,
LIMS(Laboratory Information Management System)
 Well versed in Windows, Linux and Mac OS.
 Willingness to learn new techniques, team facilitator and hard worker.
 Excellent computer hardware, trouble-shooting and problem-solving skills.
 Comprehensive problem solving abilities.
 Highly motivated with good inter-personal skills.
AREAS OF INTEREST:
 Quality Management in Engineering
 Non destructive Testing (NDT)
 Safety science and practices
 Internal Auditing
 Technology, computers and troubleshooting
HOBBIES:
 Listening to music
 Browsing the internet and social networks
 Travelling
 Cricket
FOREIGN LANGUAGE PROFICIENCY:
 English-Attained overall score of 7.5 in IELTS (International English language Testing System).
 Tamil.
 Hindi.
 Conducts Quality and Management review meetings with company management.
 Lead and trained teams in aircraft cabin maintenance on Boeing 737-800 aircraft.
 Recognition for excellent knowledge in documentation and computer skills from Technical
Manager, EADS CCQ, Qatar.
 Coordinator of ‘AEROFEST-2008’-A national level student’s technical symposium,
conducted in our college in August 2008.
 Served as department representative at college and coordinated a variety of technical and
Pg. 5/5 Jaison_CV 2015
PERSONAL DETAILS:
Father’s name : Mr. James M. Thomas
Date of Birth : 04th March 1987 (Age: 28)
Sex : Male
Marital status : Unmarried
Mother Tongue : Malayalam
Nationality : Indian
Passport No. : HShow number4792497 (Valid till 20th July 2019)
I do hereby declare that the details furnished above are true to the best of my
knowledge. I undertake to abide by the conditions of employment specified by the company and
to uphold the reputation of the company and the assigned responsibilities.
Place: Kerala, INDIA JAISON T.JAMES

Pg. 1/5 Jaison_CV 2015CURRICULUM VITAEJAISON T. JAMESMalisseril House, Res (India): 0091 479 2306532Kallumala P.O., Mobile(India): 0091 97 46 842637Mavelikara, E-mail : [email protected] District,Kerala-Show number690110,INDIAOBJECTIVE:To work for a growing organization and attain a challenging position, which will enrich me withknowledge providing opportunities to learn and work with team spirit in competitive and laborioussituations.EDUCATIONAL QUALIFICATIONS: B.E. Aeronautical Engineering(under faculty of Mechanical Engineering) with First Class (76%)under Anna University, Tamilnadu, India, April 2009. HSC-Class 12 (Higher Secondary Certificate) with Distinction (85%), Kerala State Board, India,March 2005. ICSE-Class 10 (Indian Certificate for Secondary Education) with First Class (76%) from BishopMoore Vidyapith, Mavelikara, India, March 2003.CERTIFICATIONS, TRAININGS AND MEMBERSHIPS: ASNT NDT Level 3 - Magnetic Particle Testing(MPT) andRadiographic Testing (RT). ASNT ID # Show number194800 Welding Inspector CSWIP 3.1 (TWI, UK)-Certificate # 87380 ,Expiry: 07/05/2019 ISO 9001:2008 Lead Quality Auditor- IRCA approved American Society for Non-destructive Testing (ASNT) Level II certificates in Ultrasonic Testing (UT) Liquid Penetrant Testing (PT) Visual Testing (VT) Leak Testing (LT) Member of American Society for Non destructive Testing (ASNT)- ID# Show number194800 ISO 9001:2008- Awareness training from DQS-UL, Germany. Internal Audit according to ISO 17025:2005 Training course from Dubai AccreditationDepartment (DAC), Dubai Municipality, Dubai Certified Quality Controller (Personnel Certification Program) from Decibel NDE TrainingInstitute, Palakkad, Kerala. T-BOSIET (Tropical Basic Offshore Safety Induction and Emergency Training) andH2S training certificates from Enertech, Qatar. Training on Measurement of Uncertainty according to ISO 17025 at EADS CCQ, Qatar. Fire Warden Training in November 2013, by Qatar Foundation(QF)-HSSE DirectoratePg. 2/5 Jaison_CV 2015WORK EXPERIENCE: (5YEARS + 1MONTH)Worked as Quality Officer in Mechanical and Metallurgical Testing Laboratory (Destructive andNon Destructive Testing) at EADS Competence Center of Qatar QSTP-LLC, DOHA, QATARfrom November 2011 till July 2014. Managed Laboratory Quality Management System in accordance with ISO 17025:2005(~ISO 9001). Performed and assisted in Internal and External audits according to ISO 9001:2008 and ISO 17025:2005. Reports to the General Manager on the performance of the Quality Management System, HSE and anyneeds for improvement. Co-ordinate Project/contract Quality Kick-off meetings and Quality trainings Review and Monitoring Sub-Contractor’s Quality Systems and quality performance Approve all Quality Management System documentations. Update and issue Quality manual, in-charge of document control, prepares and conducts Qualityand Management review meetings. Communicates and assists in external audits from Dubai Accreditation Department (DAC), Dubai,Qatar Petroleum (QP), Maersk Oil Qatar, NKOM, RASGAS, QATARGAS and various clients. Open and follow-up non-conformances, periodic updates of various Technical and Quality procedures. Identify non-conformances and agree corrective action(s) with responsible Management andcompanies. Attend weekly/Inspection meeting’s, Monthly progress meetings, and hold quality/inspection specialmeetings with the client representatives , prepare minutes of meetings and its distribution and followup action for the resolution of highlighted issues. Review, update, and implements QMS standards and annual training plan for all staffs. Participated in Root Cause Analysis to identify corrective actions, proposes improvement actionsand risk analysis, follow ups of various internal and external audits program. Collation of customer survey/feedbacks periodically and recommends essential changes. Coordinate Review of WPS/PQR, NDE Procedures, ITP etc..submitted by Subcontractors. Performed NDT inspections-UT, MT, VT and PT inspections of on various sites across Doha. Radiographic film interpretation, review of different NDT methods/reports viz. RT, UT, MT, PT,LT etc.. Inspection of welds on site, destructive testing and performs Visual and Macro Examination. Performed various on-site jobs like Positive Material Identification, Portable Hardness,Ferrite testing and Liquid Penetrant tests. Executed chemical analysis using Optical Emission Spectrometer (OES), performs Vickers,Brinell Hardness tests and macro-examination. Experience with various standards like ASME Section II, V, VIII, IX, B31.3, ASTM’s, API 1104,NACE, ISO’s, QP, QCS, etc..Worked as Assistant QA/QC Engineer at Mathew Associates Hook-up and Weld Services,Mumbai, India from October 2010 to October 2011.MHNRD II Pipeline and Modification Project :Topside Modification Onshore Fabrication and Offshore Hook-up at ONGCL – NQO, NP, NR, LA & LCPlatforms. Preparation and review of ITP for different type of Insulations, Coating, piping and structural fabricationlike Building structures, compressor shelters, silo platforms, LNG Jetty pipe racks, pipe supports etc. Preparation of WPS, PQR, WQT, weld maps, welding data sheets, repair procedures etc. Implement and supervise project QMS. Maintain welder performance status, welder continuity, repair rate, WPS and qualification matrix.Pg. 3/5 Jaison_CV 2015 Assure that activities requires for QMS are planned, implemented, controlled, and their progressmonitored. Monitor personnel for compliance with various Quality and safety requirements. Coordinating with respective clients and vendors throughout Inspection process period. Check on welding consumable storage/use. Visual check on weld joint for edge preparation, fit-up, root,preheat, inter-pass and final welds. Monitoring WPS implementation on job by welders. Witness of Pressure tests, leak tests, PQR, WQT, PWHT etc. Carryout welder surveillance on a daily basis and review daily welding reports. Ensure that the welders are qualified to the WPS. Check and record welding parameters and verify compliance with approved WPS. Review of approved welding procedure, Qualification records Preparation and submission of NDT records. Reviewing and interpretation of Radiographic Film. Analyzing the quality of each joint. Carrying out the stage inspection like fit-up, dimensional, welding inspection at site. Visual inspection of welded joints. Inspection of the Pre Heating, Inter pass temp and Post weld Heat treatment Development and maintenance of site QA/QC programs and monitor and collate fabrication qualityrecords to assure accurate and efficient collation and on time delivery of quality records. Ensures compliance with subcontractors and contractor internal Quality procedures as well as projectdocumentations. Fit-up, dimensional, distortion control, pre-welding, during and post welding monitoring, inspection andcontrol. Maintain interfaces with Project team and Site management and monitor plans and activities of siteQA/QC.Worked as NDT Engineer for Decibel NDE Inspections, Palakkad, Kerala, India fromJune 2009 till September 2010 Performed NDT material inspection, dimensional check ,refers and updates welding standards,welding inspections, welding procedure qualification, welder qualification, selection of electrodes,visual welding inspections etc. Follow-up with the help of other inspectors, the review of the As Built Dossier for completeness andcorrectness. Radiographic Interpretation(RTFI) of welded joints, Ultrasonic testing, Magnetic particle testing, Liquid penetrant testing, Radiographic testing and Visual testing, reporting and documentation. Handled construction and quality control activity as specified in the drawings according to the applicable standards and specifications (API, ASME, NACE,ASTM’s etc..). Witness of PQR, WPS, Non Destructive tests like UT, PT, RT, RTFI and MT. Participate in a team of QA / QC / WELDING / NDT / Engineers for inspection issues and qualityimplementation on various sites. Maintain a regular and complete submission of daily report to the Asst. Engineer in the department. Analyzing the work progress and reporting to the site in charge. Find out the modifications as per the site condition during erection and reporting to theauthority for necessary change. Keeping and maintain the fit up report and welding report. Welding inspection and analyzing the quality of each joint. Overall supervision of welding and fabrication works in the work site. Ensure safe working condition to all workersPg. 4/5 Jaison_CV 2015LEADERSHIP QUALITIES: cultural activities.PERSONAL SKILLS: Excellent verbal and written communication skills. Ability to manage and deal with people from diverse nationalities diplomatically. Proficient in MS-Office (Excel, Powerpoint, Word and Outlook)+ troubleshooting, CAD,LIMS(Laboratory Information Management System) Well versed in Windows, Linux and Mac OS. Willingness to learn new techniques, team facilitator and hard worker. Excellent computer hardware, trouble-shooting and problem-solving skills. Comprehensive problem solving abilities. Highly motivated with good inter-personal skills.AREAS OF INTEREST: Quality Management in Engineering Non destructive Testing (NDT) Safety science and practices Internal Auditing Technology, computers and troubleshootingHOBBIES: Listening to music Browsing the internet and social networks Travelling CricketFOREIGN LANGUAGE PROFICIENCY: English-Attained overall score of 7.5 in IELTS (International English language Testing System). Tamil. Hindi. Conducts Quality and Management review meetings with company management. Lead and trained teams in aircraft cabin maintenance on Boeing 737-800 aircraft. Recognition for excellent knowledge in documentation and computer skills from TechnicalManager, EADS CCQ, Qatar. Coordinator of ‘AEROFEST-2008’-A national level student’s technical symposium,conducted in our college in August 2008. Served as department representative at college and coordinated a variety of technical andPg. 5/5 Jaison_CV 2015PERSONAL DETAILS:Father’s name : Mr. James M. ThomasDate of Birth : 04th March 1987 (Age: 28)Sex : MaleMarital status : UnmarriedMother Tongue : MalayalamNationality : IndianPassport No. : HShow number4792497 (Valid till 20th July 2019)I do hereby declare that the details furnished above are true to the best of myknowledge. I undertake to abide by the conditions of employment specified by the company andto uphold the reputation of the company and the assigned responsibilities.Place: Kerala, INDIA JAISON T.JAMES

Information