Have you ever wondered why aeroplanes have curved winglets?

Almost everyone in Doha should have flown an airplane at least once in his or her life (how else could you reach Qatar?)

Upon take off, looking out the window, as you see the ground rapidly receding beneath your seats, have you ever noticed the pointy bits at the end of the plane’s wings?

They are the ‘winglets’ and they have become a standard design of all modern airplanes. So why are they there in the first place?

As Robert Gregg, Boeing's chief aerodynamicist, simply (or rather technically) put, ‘Winglets help reduce the drag associated with the creation of lift.’

In layman’s terms, winglets allow the wings to be more efficient at creating lift, which means planes require less power from the engines. That results in greater fuel economy, lower CO2 emissions, and lower costs for airlines (and passengers as well).

Boeing claims that winglets installed on its 757 and 767 airliners can improve fuel burn by 5% and cut CO2 emissions by up to 5%. An airline that installs winglets on its fleet of 58 Boeing 767 jets is expected to save 500,000 gallons of fuel annually.

Winglets help mitigate the effects of ‘induced drag.’ When an aircraft is in flight, the air pressure on top of the wing is lower than the air pressure under the wing.

Near the wing tips, the high-pressure air under the wing rushes to the lower-pressure areas on top, which results in the creation of vortices.

The vortices flow in a three-dimensional manner over the wings. They not only pull air up and over the wing, but they also pull air back. That third component is induced drag.

With the advent of winglets, the aircraft is able to weaken the strength of wingtip vortices and, more important, cut down on induced drag along the whole wing.

Induced drag can be overcome by making the wing longer.

In fact, the general rule is, the longer the wingspan, the lower the induced drag, Gregg said.

In many instances, airplane makers simply don't have the option of making the wings longer. Wingspan is often effectively limited by the size of the parking space the plane is allotted at the gate.

So instead of the adding wingspan by making the wings longer, Boeing adds wingspan by going vertical with winglets.

Richard Whitcomb developed the first winglets at NASA's Langley Research Center in 1976. Since then, airplane makers have steadily worked to improve its design and effectiveness.

According to Gregg, the first-generation winglets fitted to aircraft such as the Boeing 747-400 and the McDonnell Douglas MD11 offered up to 2.5% to 3% improvement in fuel burn compared with aircraft not equipped with the option.

Second-generation winglets, such as those found on Boeing's workhorse 737, 757, and 767 aircraft are much larger than the first-gen models, with greater curvature. Second-generation winglets offer a 4% to 6% improvement in fuel burn.

Boeing's new 737 Max airliners are equipped with third-generation winglets that offer a 1% to 2% improvement over the second-gen models.

Courtesy: techinsider.com