Wireless configaration help
Hey guys i have a problem i just bought a D LINK wireless G ADSL2+ROUTER DSL-2640T and a D LINK wireless 150 USB adapter
i am currently using a thompson router which is not wifi its a normal wired connection and was provided by qtel
now i want to change it to wireless so i bought those stuff
i tried to install them but couldnt i dunno how to do it like i installed everything configured and stuff selected the pppoe/pppoa option and i dunno what i did i just did what i thought was right and then i tried to connect but i couldnt browse the net
now can anyone jus guide me step by step in simple words plz because i have the manual and i dunt understand a word what they say :P :P
thanks :D
is your wired conenction working with the internet?
If your wired connection is working with the internet, it means the configuration on you router is correct, so stop worrying about Qtel setup.
If your problem is with the wireless only, focus on the wireless settings on the router. You should be able to see the wireless tab on your router setup page, better to change the SSID, choose chan1 or 6 or 11. Setup your password for security if you like.
Reconnect on your wireless computer.
okie i tried everything :( it isnt working like the wireless adaptor is connected with the router but the internet dosent browse i saw the map of the connection and it is connected to the adapter and router but not with the internt
i dunno what to do?? all the lights are blinking in the wireless router soo i think its some other problem and i didnt install the drivers of the dlink router coz when i try to install it says
Socket not ready!Please check if the network is ready
what should i do ??
Hope your router has a modem. Also that you are using either the adaptor for the wall socket provided with your old Thomson router or the one which is coming with the new one. Hope that during the setting you have connected the router to your computer with a LAN cable. Also you may check with a phone unit for availability of a land line connection in the wall socket. Just small hints.
yeah i tried the cd
Socket not ready!Please check if the network is ready
this error always comes and i checked all the wires are comfigured correctly? what should i do now
I think there should be a setup cd which will be easy to setup
the settings u would need to input are
VPI: 8
VCI: 35
PPPOE/LLC
Qtel provided username
Qtel provided password
after configuring these and ur net connection works..
go to default gateway page..mostly 192.168.1.1
then go to wireless option enable it then set security