lsbjr
PHILIPPINES ADDRESS:
Block 30A, Lot 16 Phase III
F1 Alimasag Street, Kaunlaran Village, Caloocan City
Metro Manila, Philippines
Tel. No. (632)-9067002
PRESENT CONTACT ADDRESS:
P.O. Box 7282, Doha, Qatar
Telephone No: (974)-4181493
Mobile No.: (974)-6546772
Email Address: [email protected]
RESUME
POSITION APPLYING FOR: SAFETY OFFICER and mechanical foreman
OBJECTIVE:
To be able to work in a dynamic organization that fosters the application and mastery of acquired knowledge and skills, thus making me a productive person for continuous career improvement while at the same time effectively contribute something to my family and the future organizational growth.
TRAINING EXPERIENCE:
Company: National Manpower and Youth council
Position: Safety Officer Industries
Year: April 20 up to May 20 2007
Address: Philippines Caloocan city
TRAINING EXPERIENCE:
Company: ISSP International Society of Safety
Practitioners
Position: Safety Officer
Year: November 2007
Address: Qatar Doha chapter
South Mhadinna khalifa
Lecture and actual activities
• Demonstrate adequate knowledge on the concept of accident prevention in construction sites;
• Plan, implement and monitor safety and health programs for construction projects;
• Articulate government safety and health regulations on construction safety;
• Know the pertinent functions of a construction safety officer, including routine construction site safety and health inspection, accident investigation and reporting, assistance to government agencies in the conduct of required government inspections;
• Formulate corrective actions and measures to minimize if not eliminate safety and health hazards within construction site.
• Supervision and participation in the implementation of safety and fire system in the field of operation.
• Practise and Apply the personal protective equipment,health and safety palicy,Hazard assessment,safe work practices,safe job procedures,company rules,training and communication,investigation and reporting.
• Apply to installation of scaffolding properly
• To apply good safety officer understands OSHA regulations and how they work in construction. They also have basic knowledge of construction operations, materials, and methods. Most health & safety officers have previous construction experience and a keen interest in construction safety.
• Responsible for preparing all production report,shiff performance report and other required record needed by top management.
• The objective of the Construction Safety Officer (CSO) program is to provide verification of a nationally recognized level of competency in relation to construction safety. The CSO program will provide practical training in various construction safety management skills and principles.
• To how use of all personal safety equipment,Actual and Lecture.
• Perform related duties as may be required and instructed by my supervisor.
• Demonstrate adequate knowledge on the concept of accident prevention in construction sites;
• Plan, implement and monitor safety and health programs for construction projects;
• Articulate government safety and health regulations on construction safety;
• Know the pertinent functions of a construction safety officer, including routine construction site safety and health inspection, accident investigation and reporting, assistance to government agencies in the conduct of required government inspections;
• Formulate corrective actions and measures to minimize if not eliminate safety and health hazards within construction site.
• Supervision and participation in the implementation of safety and fire system in the field of operation.
• Reports directly to safety Manager.
• Daily check and Monitor for the Crews Personal Protective Equipment.and Daily check for all Fire fighting Equipments such as Fire Extinguishers.
Company: GTC Gernas Trading Company
Position: Foreman/Mechanical Installer Technician
Year: Sept. 2004 –up to present
Address: P.O. Box 7282 Doha, Qatar
Duties and Responsibilities:
• Install al types of air-conditioning units such as package type, split type and ducting as well as performing repair and check up of the same.
• Mechanical installation of air-conditioning units such as chilled water, HVAC, package type, split type and ducting as well as performing repair and check up of the same.
• Maintenance of fire and safety piping for sprinkler of Qatar Petroleum Building, Engineering Onshore Dept., located in West Bay, Diplomatic Area.
• Check up fire extinguisher.
• Troubleshooting and installation of panel board.
• Perform related duties as may be required and instructed by my supervisor.
Company: Blodan Works Est.
Position: Leadman Technician, driver, Installer and
Mechanical Foreman
maintenance technician
Year: June 2000 – June 2004
Address: Riyadh, Saudi Arabia
Duties and Responsibilities:
• Maintenance and troubleshooting of VRV and chilled water.
• Electrical installations of all types of air-conditioning units.
• Maintenance of all split types, package types and window types of airconditions.
• Monitoring control panel board.
• Acted as the pick up driver to deliver air-con assistance and helpers.
Company: Alen International Corp.
Position: Field Technician/Maintenance
Year: Apr. 1999 – Nov. 2000
Address: Masambong Street
Quezon City, Philippines
Duties and Responsibilities:
• Installation of (VRV) Variable refrigerant volume and chilled water
• Repair all kinds of refrigeration and air-conditioning units.
• Install all types of air-condition package types, split types and centralized units.
• Maintenance of all bank branches of Rizal Commercial Banking Corp. (RCBC) and Metrobank located in Metro Manila, Philippines.
• Electrical installations of all types of air-conditioning units.
• Maintenance of all split types, package types and window types of air-conditions.
• Monitoring control panel board.
Company: Milwaukee Industries Corporation
Position: Leadman Maintenance Technician
Year: 1997 up to 1998
Address: Makati City, Manila Philippines
Duties and Responsibilities:
• Maintenance of VRV and cooling tower.
• Responsible for all daily, monthly and quarterly check up of
Refrigeration and package types air-con system
• Responsible for the requisition to replace defective parts of aircon system.
• Repair all kinds of refrigeration and air-conditioning units.
Company: R. Villanueva
Position: Field Technician/Maintenance Technician
Year: Mar. 1998 - June 1999
Address: Tondo Manila Philippines
Duties and Responsibilities:
• Electrical installations of all types of air-conditioning units.
• Maintenance of all split types, package types and window types of air-conditions.
• Monitoring control panel board.
EDUCATIONAL BACKGROUND:
Training center : Executive technical consultants
(Trade test and training center)
Course : Air-conditioning
Graduated : Certify 27 November 2001 (B+)
College : Technical University of the Philippines
(TUP)
Course : Refrigeration and air-conditioning
Technology
Graduated : 1999 – Manila, Philippines
High school : Macario B. Assistio Sr. High School
Graduated : 1996 – Caloocan City, Philippines
PERSONAL BACKGROUND:
Age : 28 years old
Birth date : 11 June 1979
Birth place : Manila, Philippines
Nationality : Filipino
Civil Status : Married
Height : 5’4”
Weight : 140 lbs.
Religion : Roman Catholic
Passport No. : TT 0638567
Driving license : Doha, Qatar
Language Spoken: English, Arabic, Tagalog
Character references shall be provided upon request. Photocopies of employment of certificates, trainings attended and school credentials are herewith enclosed.
